Used Balers
& Compactors
View our available used balers and compactors below. Contact AES for more details, including full specifications, pricing, installation, and maintenance services.
Description
COMING SOON! Late model Balemaster auto-tie baler will soon be in stock and available fully refurbished. Don’t miss this opportunity – call AES today, or email Jeffrey Burnley directly at jburnley@aesales.net
Industry/Application
Printing, Converting, Document Destruction
Description
This Selco model #HLO-128A auto-tie baler will produce a 30” wide x 42” high x variable length bale that weighs between 1,200 – 1,400 lbs., depending on the material. It is equipped with an 8” diameter main ram cylinder that exerts 120,000 pounds of force at 2,400 PSI hydraulic system pressure. This baler comes with a feed chute opening of 50-1/2” x 28-1/4”. The 50 Hp motor moves the ram at 14 seconds for a complete ram cycle.
Specifications
- Manufactured 1988
- Bale 30” wide x 42” high x variable length
- Feed chute 50-1/2” x 28-1/4”
- Electrical Disconnect
- 50 HP TEFC motor
- Windowed feed chute door with circuit interrupter
- 5 wire auto tie system
- Wire coil holders / trees
- Push Button operator controls / Keypad
- Bale run-out plate
- Electronic manual
- Warranty
Industry/Application
Printing, Converting, Document Destruction
Description
This Maren model #203-103 auto-tie baler will produce a 30” wide x 36” high x variable length bale that weighs between 1,200 – 1,400 lbs., depending on the material. It is equipped with an 8” diameter main ram cylinder that exerts 100,000 pounds of force at 2,000 PSI hydraulic system pressure. This baler comes with a feed chute opening of 28-3/4” x 28-3/4”. The 40 Hp motor moves the ram at 10 seconds for a complete ram cycle.
Specifications
- Year built: 1981
- Bale 30” wide x 36” high x variable length
- Feed chute 28-3/4” x 28-3/4”
- Electrical Disconnect
- 40 HP TEFC motor
- Windowed feed chute door with circuit interrupter
- 5 wire auto tie system
- Wire coil holders / trees
- Push Button operator controls
- Bale run-out plate
- Equipment manual-Electronic
- Warranty
Industry/Application
Warehouse, Distribution Center
Description
This Balemaster model #EO-1275 with automatic wire tier is ideal for warehouse or distribution center applications. The baler will produce a 44” wide x 30” high x variable length bale that weighs between 1,500 – 2,000 lbs., depending on the material. It is equipped with an 8” diameter main ram cylinder that exerts 150,840 pounds of force at 3,000 PSI hydraulic system pressure. This baler comes with a feed chute opening of 40 1/2” x 60”. The 30 Hp motor with hydraulic regeneration moves the ram very quickly at 17.0 seconds for a complete ram cycle. This baler has a no-load rated capacity of 12,750 cubic ft./hr.
Specifications
- Year Built: 2021
- Shear blade
- Bale 44” wide x 30” high x variable length
- Feed chute 41-1/2 x 60” long
- 30 Hp TEFC motor
- Main service disconnect
- Windowed feed chute door with circuit interrupter
- 5 wire auto tie system
- Wire coil holders
- PLC – Allen Bradley Micrologix 1400
- Touch screen operator controls
- Bale run-out plate
- Electronic manual
- Warranty
Description
This refurbished American Auto-Tie Baler will produce a 30” wide x 43” high x variable length bale, with weights between 1,800 – 2,200 lbs, depending on the material. The 9” diameter main ram cylinder exerts 190,852 pounds of force at 3,000 PSI hydraulic system pressure. The 75 Hp motor moves the ram at 10.4 seconds for a complete ram cycle. This baler has a no-load rated capacity of 14,273 cubic ft./hr. Feed chute is included. Comes with a warranty
Specifications
- Year Built: 2023
- Serial #: 5029H975
- Windowed Feed Chute: 27 1/2 W x 49 1/2″ L, with circuit interrupter
- 5-wire auto-tie system, with coil holders & trees
- 75 HP TEFC motor
- Main service disconnect
- Upgraded Allen Bradley PLC
- Touch screen operator controls
- Bale run-out plate
- Electronic manual
- Warranty
Industry/Application
Printing, Converting, Document Destruction
Description
This refurbished American auto-tie baler will produce a 30” wide x 43” high x variable length bale, with weights between 1,800 – 2,200 lbs., depending on the material. It is equipped with a 9” diameter main ram cylinder that exerts 190,852 pounds of force at 3,000 PSI hydraulic system pressure. The 75 Hp motor moves the ram at 10.4 seconds for a complete ram cycle. This baler has a no-load rated capacity of 14,273 cubic ft./hr. Feed chute is included. Comes with a warranty.
Specifications
- Manufactured 1998
- Shear blade
- Feed chute 27-1/2” x 49-1/2” long
- 75 HP TEFC motor
- Main service disconnect
- Windowed feed chute door with circuit interrupter
- 5 wire auto tie system with wire coil holders / trees
- PLC – Allen Bradley SLC-500
- Push button operator controls / keypad
- Bale run-out plate
- Electronic manual
- Warranty
Industry/Application
Warehouse/Distribution Center, Box and Corrugated, Secure Destruction
Description
This baler will produce a 44” x 43” x variable length bale that weighs between 1,200 and 1,600 Lbs. depending on the material. It is equipped with an 8” diameter hydraulic cylinder that exerts 125,664 Lbs. of compressing force at 2,500 PSI hydraulic operating pressure. The 30HP motor and regenerative hydraulic circuit create a 14.2 second no load cycle time. Normal operating displacement of 15,650 cf/hr.
Specifications
- Refurbished to factory specifications for the model and year of manufacture
- Manufactured 2008
- 43” x 50” feed chute opening
- Bale 44” x 43” x variable length
- Dust-tight, windowed feed chute door with control circuit interrupter
- Five wire automatic tie system
- 460 volt 3-phase power
- 30HP hydraulic power unit
- 8” bore main hydraulic cylinder
- Air oil hydraulic cooler
- Allen Bradley MicroLogix 1500 PLC
- Push button/touch screen controller
- Lockable rotary style control panel disconnect
- One (1) 48” long bale run-out table
- Warranty
Industry/Application
Box and Corrugated/Folding Carton, Commercial Printing
Description
This baler will produce a 30” x 36” x variable length bale that weighs between 1,300 and 1,700 Lbs. depending on the material. It is equipped with an 8” diameter hydraulic cylinder that exerts 150,900 Lbs. of compressing force at 3,000 PSI hydraulic operating pressure. The 30HP motor and regenerative hydraulic circuit create a 15 second no load cycle time. Normal operating displacement of 5,600 cf/hr.
Specifications
- Refurbished to factory specifications for the model and year of manufacture
- Manufactured 2004
- 27” X 32” feed chute opening
- Bale size 30” wide x 36” high x variable length
- Dust-tight, windowed feed chute door with control circuit interrupter
- Five wire auto-tie system
- 230 volt 3-phase power
- Fused disconnect switch
- Touch Screen operator interface
- Allen Bradley MicroLogix 1200 PLC
- 30HP hydraulic power unit
- 8” bore main hydraulic cylinder
- Air-to-oil hydraulic Cooler
- Low Oil / Hot Oil Sensor
- Warranty